Conveyor head pulley, also called drive pulley, is a cylinder-shaped driving part. As a key component part of transmitting power, it is used to transmit power for belt conveyor. There are rubber-faced conveyor head pulleys and smooth conveyor head pulleys.
1. Our pulleys are of stable structure, reliable performance and long operating life. They can work normally in dusty, wet and muddy environment.
2. According to the carrying capacity, our head pulleys are divided into three types: light-duty, medium-sized and heavy-duty. In addition, pulleys of the same diameter have different diameters of axle and center spans.
Range of Diameters (mm): 500/630/800/1000
Light-duty Conveyor Head Pulleys
Conveyor Head Pulley
The diameter of axle is between120 and 180 mm. The axle and the hub is single-button connection. The tube structure is single side plate welded. It is unidirectional output shaft.
Middle-sized Conveyor Head Pulleys
The diameter of axle is between 120 and 180 mm. The axle and the hub are expanding sleeve connected.
Heavy-duty Conveyor Head Pulleys
The diameter of axle is between 200 and 220 mm. The axle and the hub are expanding sleeve connected. The tube structure is cast weld construction. Heavy-duty conveyor head pulleys have unidirectional output shaft and bilateral output shaft.
3. The surface has bare steel, and rubber cover with chevron and diamond pattern. The bare steel head pulleys are suitable for such belt conveyors with low power and narrow welt width in dry environment. The head pulleys with chevron rubber cover have greater friction factor, better slip resistance and good drainage, but they have direction. The pulleys with diamond rubber cover are suitable for bilateral conveyors. For important occasions, the pulleys with vulcanized rubber cover are most suitable.
4. The shaft block of our head pulley is lubricated by grease cup lubricating oil.
ISO, GB, DIN22107, CEMA
CE certification, ISO certification
Conveyor head pulleys are key components of belt conveyors and are widely used in machinery, metallurgy, mines, ports and docks, chemical, electric power, cement, steel and coal industries.
Range of Production
Diameters of Pulley (mm): 250/315/320/400/500/630/800/1150/1200/
Length of pulley depends on the width of conveyor belt.
The Width Range of conveyor belt (mm): 500/650/800/1000/1200/1400
Our company is a China-based conveyor head pulley manufacturer. It has received ISO9001 certification and mainly engages in producing and selling carrying idlers, impact idlers, comb idlers, conveyor tail pulleys and other products. To satisfy different customers, we also produce conveyor belts, conveyor belt fasteners and conveyor belt cleaners. Our products are of high quality, stable performance and reasonable price, so they have been well received in more than 30 countries and regions such as Britain, Spain, South Africa, Singapore, Australia, Arab and Canada. If you need these products, welcome to contact us!